Growth and characterization of Hg(1-x)Zn(x)Se

Hg sub 1-xZn sub xSe alloys of composition x=0.10 were grown in a Bridgman-Stockbarger growth furnace at translation rates of 0.3 and 0.1 micron sec. The axial and radial composition profiles were determined using precision density measurements and IR transmission-edge-mapping, respectively. A more radially homogeneous alloy was produced at the slower growth rate, while the faster growth rate produced more axially homogeneous alloys. A determination of the electrical properties of the Hg sub 1-xZn sub xSe samples in the temperature range 300K-20K was also made. Typical carrier concentrations were on the order of magnitude of 10 to the 18th power cu/cm, and remained fairly constant as a function of temperature. A study was also made of the temperature dependence of the resistivity and Hall mobility. The effect of annealing in a selenium vapor on both the IR transmission and the electrical properties was determined. Annealing was effective in reducing the number of native donor defects and at the resulting lower carrier concentrations, charge carrier concentration was shown to be a function of temperature. Annealing caused the mobility to increase, primarily at the lower temperature, and the room temperature resistivity to increase. Annealing was also observed to greatly enhance the % IR transmittance of the samples. This was due primarily to the effect of annealing on decreasing the charge carrier concentration

Wavefunctions and counting formulas for quasiholes of clustered quantum Hall states on a sphere

The quasiholes of the Read-Rezayi clustered quantum Hall states are considered, for any number of particles and quasiholes on a sphere, and for any degree k of clustering. A set of trial wavefunctions, that are zero-energy eigenstates of a k+1-body interaction, and so are symmetric polynomials that vanish when any k+1 particle coordinates are equal, is obtained explicitly and proved to be both complete and linearly independent. Formulas for the number of states are obtained, without the use of (but in agreement with) conformal field theory, and extended to give the number of states for each angular momentum. An interesting recursive structure emerges in the states that relates those for k to those for k-1. It is pointed out that the same numbers of zero-energy states can be proved to occur in certain one-dimensional models that have recently been obtained as limits of the two-dimensional k+1-body interaction Hamiltonians, using results from the combinatorial literature.Comment: 9 pages. v2: minor corrections; additional references; note added on connection with one-dimensional Hamiltonians of recent interes

Erosion-corrosion behaviour of Zirconia WC-6Co, WC-6Ni and SS316

The current study investigates a ceramic, two cermets and a metal under solid-liquid impingement with 3.5% NaCl and 150mg/l hydraulic fracturing sand at two extreme angles of impact, 90° and 20°. The materials tested were Zirconia, sintered WC-6Co, sintered WC-6Ni and SS316. Each material was exposed to a testing regime using re-circulating impinging jet apparatus with a velocity of 19m/s and one hour duration. The electrochemical properties of the materials were investigated in-situ through anodic and cathodic polarisation and application of cathodic protection. Post experimental analysis of the degraded surface was completed using Scanning Electron Microscopy (SEM) and Optical 3D Imaging. Zirconia exhibited a brittle response to erosion-corrosion testing with the mass loss at 90° being fifty times greater than the negligible mass loss at 20°. WC-6Co and WC-6Ni both outperformed SS316 under all solid-liquid impingement erosion-corrosion testing regimes. WC-6Ni exhibited slightly better erosion-corrosion resistance over WC-6Co at both 90° and 20°. SS316 had the best corrosion resistance and showed passivation during anodic polarisations in solid-liquid impingement conditions. The nickel binder increased the corrosion resistance of WC-6Ni over WC-6Co. Cathodic protection was successfully applied on sintered WC-6Co and SS316 isolating the key components of erosion-corrosion